Old bales. Wet manure mixed with straw. The material nobody else can process. Biogas facilities across Europe sit on mountains of cheap feedstock they cannot use, because it plugs every machine they feed it to. We built the machine it does not plug.
Book a Biogas Demo → How Anvil Screens WorkLong fibers wrap around augers and stall conveyors. Raw manure floats and clumps in the reactor, so bacteria cannot reach it. Slow digestion means less gas from the same tonnes. The energy is in the pile. The economics make sense. The equipment is what fails.
Manure digesters can more than double gas output when properly pre-ground straw is added.
The anvil screen is a solid cutting edge, not a perforated screen, so wet manure and long straw grind clean instead of blinding off the holes.
Traditional grinder screens are circular holes punched through steel. Feed them wet manure with long fiber and the holes plug immediately. The Anvil screen is different. Think of the rotor as a clock face: we close the bottom section, from 5 to 7 o’clock, with a solid cutting edge. Material is cut against the anvil instead of forced through holes. The top stays open, so material flows at the right speed without overwhelming the discharge augers.
You can still plug an Anvil screen if you really try. But you would have to work at it, and you would know you were doing it.

At a biogas facility in Austria we ran the exact material every operator dreads: wet manure mixed with straw. The H-1030 with Anvil screens, on a 230 HP tractor, processed it at 15 to 18 tonnes per hour. No plugging. No stopping to clear augers.
“The loader driver couldn’t keep up.”
In Germany, a dairy switched from long straw bedding to pre-ground straw. Bedding got thinner because ground straw absorbs faster. Barn scraping got easier. And the digester stopped choking: manure became the main cash crop.
Horse manure and straw bedding, what Germany and France call Mist, run through an H-1030 on an anvil screen. One pass turns a wrapping, floating mat into an even feed the reactor can actually digest. Real jobs in Austria, not renders.




The wet material specialist. Rear mill, tilt tub, 15 to 18 t/hr on manure and straw mixes.
View H-1030 →88 forged hammers and 20 to 25 t/hr for facilities processing hundreds of tonnes per day.
View H-1135 →Stationary electric drive. No tractor, no diesel. Purpose-built for a fixed spot beside the reactor.
View H-1135E →Europe is targeting 35 billion cubic metres of biomethane by 2030 and produces less than 5 billion today. A third of the feedstock is supposed to come from manure and agricultural waste. It only counts if you can process it.
We will grind it in front of you. If you run a facility or serve biogas customers as a dealer, let’s talk.
Book a Demo →