Built for the mill
The grain hopper takes the place of the tub as the intake for grain. Load it from the top. The hopper meters corn or wheat into the hammermill, and the stacking conveyor puts the finished product straight into a bunker, a silage bag or a feed wagon.
The two hoppers
The simple hopper
For loading with an auger.
- Fed by an elevator auger
- The straightforward way to add grain to your machine
- For the H-835, H-1000, H-1030 and H-1135

The European hopper
For loading straight from the bucket.
- Load it directly with the loader bucket
- A hydraulic dosing wheel feeds the mill, run by the governor
- The tub does not turn, so there is less wear on the tub drive
- Built in Europe
- For the H-1000, H-1030 and H-1135
More on the European hopper
Controlled feed, no overload
The hydraulic dosing wheel is tied into the HayBuster governor. It feeds grain into the mill at a controlled rate, and slows or stops on its own as the load climbs, the same way the tub does in hay. Nobody has to stand over it, and the mill does not bog down.
No tub rotation needed
With the hopper in place the tub does not turn. All the feed control happens in the hopper. That means less wear on the tub drive when the machine is running grain.
Heavy steel. Smart hydraulics.
A welded lower tank with bolted galvanised upper panels. The welded section takes the load at the dosing wheel. The bolted upper panels keep the shipping volume down. A service door on the side gives direct access to the feed mechanism for cleaning between crops.
Fitting it
Bolt the upper panels, mount the hopper to the machine, connect the hydraulics. It is about a one-day job for a dealer technician.




European hopper specs
Show the specs
- Loading area: 4.0 m x 2.7 m
- Loading height: 3.8 m
- Feed: hydraulic dosing wheel, governor-linked
- Build: welded lower tank, bolted galvanised upper panels
- Service door for cleaning between crops
- Fitting: about one day for a dealer technician
- Fits: H-1000, H-1030 and H-1135. It also fits the earlier H-1130.
Ear corn kit
Corn on the cob. Earlage. CCM.
There are many names for it. The ear corn kit is made for exactly this, and it works excellent. It is for corn on the cob only. For loose grain you want the grain hopper.
Acid option
Show the acid option
For operators who want to store ground grain without fermenting it: grain for open bin storage or dry feed. Propionic acid is metered onto the grain as it passes through the mill, which prevents mould and extends shelf life.
- HP20, the simple kit. An acid injection pump with flow gauge and calibration. Hoses and fittings included. For basic acid preservation without complex controls.
- PDH, the adjustable kit. A programmable acid pump. You dial the dose to the grain throughput. Best for large operations running several moisture levels in one day.
Optional, not required. It is not needed for grain going into a bunker, bag or sealed silo. Fermentation does the preserving there. The acid kit is for ground grain that has to stay stable in the open air.
Tell us what you are grinding.
Got it.
Your details go to our sales team only. No mailing lists, no spam.